93% Purity Industrial Oxygen Generator is the most economical solution to provide site oxygen. This purity oxygen is suitable for many applications such as combustion assistance, metal cutting, waste water treatment, fish farming,etc. It is ideal replacment of cylinder oxygen. Cylinder oxygen is expensive and inconvenient. On-site 93% purity Industrial Oxygen Generator is installed on one skid, it is easy for transportation and installation, also its operation is very simple, with a click of start on the touch screen, machine start to run.
Gamma Oxygen Generator Features
Skid structure, easy installation.
When
oxygen generator reaches site, just connect the Air Compressor into
main machine, then with one simple touch on the start, the whole machine
starts to work, no need for site installation, site training,etc. No
need for Gamma engineers go to site, further saving customer`s cost.
Special filling device
Making
the fill of molecular sieve achieve max density and evenness. Getting
rid of molecular sieve creeping and wearing and [tunnel effect" from the
root. Therefore the molecular sieve has longer lifetime, higher utility
ratio and lower material air consumption.
Special gas distributors
Equipped at both top and bottom side of the adsorption tower
adapting
multi-layer hole plate structure and special hole arrangement. These
makes gas distribution within tower more efficient.
Pipeline flow speed control technology
Making
the molecular sieve avoid damage caused by collision by [boiling" at
the top of adsorption tower, no need extra pressing device.
Advanced middle bed layer pressure balancing process
Can be regarded as a four tower structure with series connection of pre-adsorption stage and clean adsorption stage, achieving higher purity oxygen.
Packing and shipping
After sales service
Free customer site installation guidance, free training for operation
and maintenance. No need to pay for Gamma engineer's site service.
One years operation warranty. Should any trouble happened, Gamma
provide and send parts free of charge. If necessary, Gamma engineer
comes to site at our own cost.
93% Purity Industrial Oxygen Generator 93% Purity Industrial Oxygen Generator,Psa Oxygen Generators,Oxygen Generators,Oxygen Generators System Shandong Gamma Gas Engineering Co. Ltd. , http://www.gammagas.com
According to the LEDinside survey of the Green Energy Division of TrendForce, a global market research organization, the output value of LED chips in mainland China in 2013 (the capital-based enterprise, the same below) is 6.2 billion yuan, an increase of 17. LEDinside analysts. Yu Bin said that the rapid increase in the penetration rate of LED commercial lighting in 2013 boosted the capacity utilization rate of the chip. However, as the price of LED chips continued to decline, the growth rate of output value was not as good as the output. It is expected that the output value will increase by the same growth rate in 2014. 7.3 billion yuan.
The demand for lighting chips is strong. In 2013, China's chip production rate reached 80%. In the first half of 2013, LED commercial lighting market demand was strong. Traditional lighting accelerated the transformation speed. Midstream packaging manufacturers gradually integrated downstream lighting, resulting in the first half of the mid-power lighting chip. The phenomenon of goods.
The capacity utilization rate of manufacturers based on lighting chips has increased rapidly. Dehao Runda's LED chip revenue in 2012 was only 220 million yuan, and it is expected to reach 350 million in 2013, which will grow by more than 50%. Yuanrong Optoelectronics will double its revenue in 2013. Sanan Optoelectronics, Tongfang Optoelectronics and Hualei Optoelectronics have maintained a high level of capacity utilization.
Manufacturers based on display chips have increased their lighting chip business. Huacan Optoelectronics LED lighting chip revenue has gradually increased, and it is expected to reach 50% by the end of 2013; Silan Mingxin's new production machine is mainly used to produce lighting chips.
In the case of the rise of local chip companies in mainland China, the market share of Taiwan and international manufacturers in the mainland is gradually shrinking. LEDinsde data shows that in 2013 China's LED chip country has reached 80.
In the field of display chips, in 2013, the trend of rapid price decline continued, and corporate profits did not increase with revenue. The drop in prices has led to a sharp drop in profits, which is one of the reasons why display chip makers have increased their lighting chip business.
Market concentration has further improved, and industrial integration is on the rise. In 2013, China's LED chip industry concentration has further improved. From the top five manufacturers' revenue market share, it has increased from 61.9 in 2012 to 64.4. As the industry continues to develop, the concentration will be It will continue to improve, and industry reshuffle and integration will be inevitable. Yu Bin said that from the current chip industry situation, although the price decline rate has slowed down, but the profitability of enterprises is still difficult to upgrade, small and medium chip manufacturers lacking funds and technology will become the next batch of bankruptcy or mergers and acquisitions. Object.
Figure 2 The top five chip manufacturers' output value ratio and forecast 2014 lighting is still the growth point, 4 inch epitaxial technology is gradually introduced into 2014, in the case of backlight and display field growth slowdown, LED lighting is still the chip manufacturers competing Main areas. LEDinside expects global LED lighting output value to reach 17.8 billion US dollars in 2014, the total number of LED lighting products shipped to 1.32 billion, an increase of 68.
In terms of technology, the 4-inch epitaxial growth technology has been rapidly increased by the mainland manufacturers. Except for the use of Dehao Runda 100, it is expected that the proportion of Sanan Optoelectronics, Huacan Optoelectronics and Guoxing Optoelectronics will reach more than 30%. FlipChip will also be sought after, and it is widely used in high-power lighting and flashlights due to its own advantages.
