Looking something like a drill press, a CNC Milling machine uses a cutting tool that moves in all three dimensions, removing material to achieve the desired part shape. The cutting tool usually rotates about an axis that is perpendicular to the table that holds the material to be cut. A cutting tool protrudes down from a rotating spindle. A block of material is placed on a moving table below the cutter. Our machines are optimized to provide high quality turning, milling, drilling, tapping, boring, threading and grinding capabilities on Custom Plastic Parts, Nylon Custom Plastic Parts, bakelite plastic machining parts and more other material Cnc Milling Parts. Or if you like, POM, PE, UPE or other material cnc milling are also available here.
Custom Plastic Parts,Nylon Custom Plastic Parts,Custom Plastic Parts Tools,Bakelite Plastic Machining Parts SG Industry (China) Co.,Ltd , http://www.sgindustrycn.com
In the past few years, due to the impact of Japan’s nuclear disaster and high energy prices, the global awareness of the green energy industry has risen again, and related industries have returned to growth. However, in the past, the importance of open source was emphasized. Manufacturers have successively invested in the improvement of manufacturing and conversion efficiency of solar panels. However, after years of hard work and limited progress, it has been unable to break through the bottleneck of 20% conversion efficiency. Under this circumstance, attention has gradually shifted to LED power-saving efficiency that can be throttled on a large scale. This trend began to take shape in the second half of 2013, and it is expected that the LED lighting growth period will start in 2014 and the next three years.
Most of the last wave of LED industry originated from the financial tsunami at the end of 2008. Samsung launched LED-backlit thin TV, which unexpectedly sold and opened up the LED TV growth cycle of 18 months.
LED thin TV penetration has been climbing, from 3% in 2009 to 38% in 2011. The world's LED stock prices have climbed to a high point, and each company does not disconnect production capacity.
However, the Japanese and Chinese are embarrassed, and this wonderful thing has undergone a huge reversal in 2011. The mainland promoted the 12th Five-Year Plan, which greatly subsidized the results of MOCVD machines, resulting in the largest number of MOCVD machines in the world with more than 1,000 units. A large amount of production capacity has opened, causing the price of LED backlights to collapse. Since then, LED has fallen into a frozen period. The entire industry has also entered a long-term capacity adjustment since the second half of 2011 until the end of last year.
Another reason for the LED industry to enter capacity adjustment is the deferral of the LED lighting industry. The reason for the failure of the ten-city street lamp plan, in addition to the heat problem can not be solved, the light bulb manufacturers are not willing to support LED lighting is another main cause. At that time, LED bulbs were expensive and could not attract the favor of ordinary consumers. It was another reason why they could not be promoted.
For various reasons, it is expected that LED lighting will replace general lighting in 2012, and the expectation of adding new kinetic energy to the LED industry will be lost. As a result, the original expansion manufacturers were forced to enter capacity adjustment in the first half of 2012 to 2013, and the LED industry was dead.
In the second half of 2013, this piece of silence was broken by the US giant CREE, which was the first to jump into LED lighting. To fill the capacity, Cree officially entered the US lighting market in mid-2013, launching 40 watts for $9.97 and a 60-watt replacement bulb for $12.97. Such an affordable price, in the lighting market, finally provoked embarrassment, causing great repercussions.
In the second half of 2013, Cree sold more than 8 million sets of 3 sets of light bulbs in the United States. The profit was also positively reflected in Cree's earnings last year.
In the fourth quarter of 2013, the lighting business accounted for Cree's total revenue, from 35 in the previous year to 42%, and revenue growth of 42%, which is the most amazing growth in the three business sectors. After Cree invaded the lighting industry, lighting manufacturers also followed suit. It is expected that the penetration rate of LED lighting will increase from 8% to 15-20% in 2014. In 2015, it will have a chance to come to 40%, which will increase the LED industry. kinetic energy. 