Stainless Steel Sanitary Tubes/Pipes Kaysen Steel Industry Co., Limited is a China manufacturer and supplier of Stainless Steel Sanitary Tubes/Pipes, Sanitary Welded Tubes ,Sanitary Seamless Pipes,ASTM A249 Stainless Steel Tubes,ASTM A269 Stainless Steel Tubes,ASTM A270 Stainless Steel Tubes,DIN 11850 Stainless Steel Pipes,ASTM A554 Decorative Stainless Steel Pipes.We offers tubes to you with superial quality Stainless Steel Sanitary Tubes/Pipes,Sanitary Welded Tubes,Sanitary Seamless Pipes,ASTM A249 Stainless Steel Tubes,ASTM A269 Stainless Steel Tubes,ASTM A270 Stainless Steel Tubes,DIN 11850 Stainless Steel Pipes,ASTM A554 Decorative Stainless Steel Pipes. We provide for quality food processing, high surface quality ensures the necessary hygienic or sanitary safety. Our division for surface treatment guarantees optimal finish according to your requests.If you have any questions or inquiries please feel free to contact us. Stainless Steel Sanitary Pipes,Stainelss Steel Sanitary Tubes,Sanitary Welding Tubes,Sanitary Seamless Tubes Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com
According to the electrical schematic, this signal is derived from the intermediate frequency power supply. According to this clue, the intermediate frequency power supply part is inspected and found that the HS light on the control board sKI is not lit, and the HS light indicates that the machine part is ready and can be quenched. Check the input terminal of the control panel, SKI does not get this signal, the generation of this signal, Kl is the machine part preparation relay, measuring K1 coil no voltage signal, continue to measure and find that K20O contact is not closed, relay KZOO is subject to PLC Output AZ. There is no problem, and the coil of the measuring relay K20O also has a 24v voltage signal, then the relay K200 is definitely damaged. The coil of the K200 is measured, and the coil is found to be blown. After replacing a new relay, the fault is eliminated. 24V was overhauled before the transformation, and the mechanical precision was restored to the factory precision.
Using NuM's MMIT00I software, we have compiled our own graphical interface according to the characteristics of the machine. The operator does not need to program. Just fill in the appropriate data according to the workpiece material and processing requirements in the corresponding page form. In the software design, the algorithm for eliminating the accumulation of the tooth error is adopted, and the non-contact method is adopted for the position detection of the grinding wheel.
During commissioning, it is found that the direct output dynamic range from the analog port of the numerical control system can not meet the control accuracy requirements of the electro-hydraulic proportional servo valve, and the PLC segmentation control is used to control the high-precision continuously adjustable signal source. Prevent loss of control or damage to expensive servo valves.
Sanitary Tubes Specification:
Standard: A270 3A,DIN11850,A249,A269,A554
Grade: SS304(1.4301), SS304L(1.4307),SS316(1.4401),SS316L(1.4404)
Size:
â–º Round tubes and pipes with an OD of 12 to 219, 10 mm and a wall thickness of 1 to 3.9 mm.
â–º Square tubes with a section of 10x10 to 120x120 mm and 1 to 5 mm thick.
â–º Rectangular tubes with a section of 20x10 and 180x60 mm and 1 to 6 mm thick
Surface & Roughness
► CC/BC – inside and outside pickled
► CD/BD – inside pickled, outside polished
â–º Inside polished & Outside polished
Length: 6m or customer-made.
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical,