Gravity Separator is one of the commonly used in gravity separation methods, can effectively deal with a variety of different sizes of raw materials. the separator is simple in structure, low in operating cost, and gravity separator are widely used for sorting of minerals with large differences in density. it is a commonly used equipment in the coal preparation industry and in the selection of gold, tungsten, tin mine operations, at the same time, gravity separator is also used to deal with non-metallic ore, such as asbestos, diamond, kaolin, In the electronic waste recycling industrial it is used for metal and non-metallic separating and recovery,in our company we have aboratory shaker table,6-S Mining Shaking Table,Double deck concentration shaking tables,Jig Machine,Spiral Chute for gravity separation.
Gravity Separator Gravity Separator,Lab Shaker Table,Common Shaking Table,Newly Shaking Table Jiangxi Mingxin Resource Recycling Co.,Ltd , http://www.weee-china.com
1. PTFE Mesh Conveyor Belt
2. Heat resistant, Microwave safe
3. High drying efficiency
4. Non-toxic & non-stick
5. Great tensile strength
PTFE Coated Fiberglass Mesh Conveyor Belt
PTFE Coated Fiberglass Mesh Conveyor Belt is ideally suited for conveying products within highly efficient air distribution systems allowing optimised moisture removal to take place and is commonly used within ultra violet and infra red dryer units
The open area allows maximum air flow optimising drying times whilst its extreme properties make it a natural choice for dryer manufactures.
Applications
PTFE Coated Fiberglass Mesh Conveyor Belts are used in applications such as the drying of printed products for example; Point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry.
Other applications range from the drying of cereals, non woven's, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few.
Features & Benefits
PTFE open mesh conveyor belting is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. This material can be offered in carbon loaded black therefore providing antistatic properties.
Material Properties
· Temperature resistance: -70° C up to plus 260° C
· Chemical Inertness
· Ultraviolet, Infra-red, microwave, radio frequency resistance
· Non-Stick surface
· Lightweight and energy efficiency for economical operation
Additional Information
4x4 open area mesh is available in widths up to 4000mm wide and can be supplied at any length required. In addition film, glass or kevlar can be applied as edge reinforcement depending of the environment it will be used within. There are various methods of joining screen-printing belts however the metallic clipper or spiral types are more typical
PTFE Mesh Conveyor Belt for Food Process Belt
Model NO.: YS-6008
Structure (For Chain): Roller Chain
Usage: Transmission Chain
Color: Brown/Black
Trademark: Youngsun
Specification: SGS/CE/FDA/ISO
Origin: Jiangsu Taixing
HS Code: 70195900
Specifications