Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The contactless robotic automatic robot leisuwash 360 is the newest technology of contactless high-speed automatic washing of cars. Fully automated process of contour washing and drying of the car in combination with the technological capabilities of self-service (payment, choice of car wash programs) provide high-quality contactless washing services in the absence of staff.
Machine Car Wash,Leisuwash 360 Plus,Automatic Express Car Wash,Touchless Car Wash Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdlaserwash.com
Â
Model
Power
Fan
Capacity
Input Size
Input Moisture
Output Moisture
Fuel Consumption
HGJ-I
4kw
1.5kw
300-400kg/h
3-5mm
25-35%
8-12%
10-15kg/h
HGJ-II
5.5kw
1.5kw
500-800kg/h
3-5mm
30-40%
8-12%
15-20kg/h
HGJ-III
7.5kw
1.5kw
800-1000kg/h
3-5mm
35-45%
8-12%
25-35kg/h
1. Single Stove Sawdust dryer:
The Moisture reducing rate of the sawdust dryer is 8-12%. This sawdust dryer is equipped with one hot air boiler, it is suitable for drying raw material with moisture content less than 20-25%.If the moisture content of the raw material is higher than that, it will need several times of drying to achieve the requested moisture content for briquetting,pelletizing.
2. Double-Stove Sawdust dryer:
This double stove sawdust dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -50%, it can reduce moisture from 20%-50% to 8-12% via only one passage.
Hot airflow type sawdust dryer is advanced drying equipment which also called pipeline dryer. This type of dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on. It's suitable for home use, farm use and small factory; It's mostly used for further pellet and briquette processing project.
Features:
1) Raw materials should be sawdust, suitable for drying the moisture 20-40%; Final moisture 8-12%.
2) Diameter of raw materials: (3- 5mm)
3) Temperature of Hot Air: 180-250 Celsius degree.
4)Â This sawdust dryer reduces moisture to 8-12% with lower cost consumption and high efficiency.
5) The wood sawdust dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
Working principle of sawdust pipe dryer:
Wet material is input into the hopper. The stove (boiler) generates hot air which mixes with wet materials and then is sucked into the pipes by exhaust blower (fan) quickly. And then hot air are flowing and going through the curving pipes and buffer(drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. 
Operating Guide:
1. After installation, start the blower, check the running direction and see if the suction at the material inlet is normal.Â
2. Tie up a bag whose both ends are open around the outlet of the dust catcher.
3. Feed the raw material to the hopper. Remove or screen out large particles mixed in the material before drying, which will benefit drying speed.
4. Put fuel into the furnace and light it, start the blower. When the air temperature at the outlet of blower gets to 100°C, begin material feeding and drying process.
5. Large piece of the material at dregs-outlet must be removed, which is favorable to feeding.
High Efficiency Hot Air-Flow Dryer for Biomass Wood Sawdust
Model NO.: HGJ-II
Warranty: 1 Year
Customized: Customized
Condition: New
Color: Multi Color
Main Motor: 4kw
Fan: 1.5kw
Input Material Size: 3-5mm
Input Moisture: 35%
Output Moisture: 10%
Capacity: 300-400kg/H
Consumption: 10-15kg/H
Keyword 1: Sawdust Dryer
Keyword 2: Sawdust Pipe Dryer
Keyword 3: Rice Husk Dryer
Trademark: AG
Transport Package: Wooden Case
Specification: 6.5 CBM
Origin: Zhengzhou, China
HS Code: 84193200
 Airflow Sawdust Dryer, Biomass Sawdust Pipe Dryer Machine