CNC five axis machining is to add two other axes on the basis of three-axis, namely A-axis and B-axis. Now five-axis machining is also very common, commonly used in ships, aerospace, automobiles, light industry, medical and other high-precision field of instrumentation. Five-axis machining can process different sides of the workpiece without changing the position of the workpiece on the machine tool, which can greatly improve the processing efficiency of prismatic parts. Now, whether it is for parts processing or mold processing, the use of five-axis machining is becoming more and more common. It can not only complete the task of mechanized machining of complex workpieces, but also can quickly improve the processing efficiency and shorten the processing process.
SCZY has rich experience in five-axis machining, we can not only process aluminum alloy, copper alloy and other materials, but also steel materials. Our five-axis machining accuracy can reach ±0.01mm (specifically rated according to material and structure). Please see the pictures below:
Cnc Five Axis Machining,Cnc Five Axis Machining Parts,Five Axis Cnc Machining Spare Part,Cnc Machining Parts 5 Axis,Cnc Five Axis Machining Center Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
1, the adjustment of the machine, in the installation, first of all to adjust the machine performance, this process must be patient and serious, check the machine is not a dust and used iron scrap, etc., to carry out the necessary clean-up to reduce Late troubles.
2, the slider stroke adjustment, pay attention to check the thickness of the mold and pay attention to check the ratio of the upper and lower modules is not normal, the module is normally controlled in the trip line switch point, this must pay attention.
3, the adjustment of the travel module, which is to adjust the upper point of the module, when the module reaches the highest point, set the switch, and set aside the slider's stop position, and also to slow down Modules to better protect the machine and mold.
4. The adjustment of the gap is mainly to measure the distance between the upper module and the lower module. The specific gap setting is determined according to the folded plate.
5, the angle adjustment, the adjustment of this angle has a certain relationship with the product, in general, folded 90 ° mold, then the middle angle must be greater than the two sides of the angle, then its elasticity can be adjusted according to the screws, in the bending In the meantime, the pressure gauge can be used to adjust the pressure and prevent the mold from chipping.
How to correctly install and debug CNC bending machine mould?
CNC bending machine is a kind of forging machine, which is mainly used in the metal processing industry. CNC bending machine mold is composed of many parts, so be sure to check the state of the equipment when installing, and strictly follow the steps, while paying attention to safety when installing and debugging, CNC bending machine mold installation The debugging process. Then, what are the precautions in the installation and commissioning of CNC bending machine moulds?