Precautions when using the pump

Pump use precautions: 1, if the pump has any small faults remember not to let it work. If the pump shaft filler is completely worn after the timely addition, if you continue to use the pump will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller. 2, if the pump in the process of using a strong vibration at this time must stop to check what is under, otherwise it will cause damage to the pump. 3, when the pump valve leakage, some people will use dry soil filled into the pump inlet pipe, rushed to the end of the valve with water, this approach is not desirable. Because when the dry soil into the inlet pipe when the pump starts to work these dry soil will enter the pump, then it will damage the pump impeller and bearings, thus shortening the pump life. When the end of the valve leaking must take to repair, if it is serious then it needs to be replaced. 4, after using the pump must pay attention to maintenance, for example, when the pump is running out of the pump water to drain, it is best to remove the water pipe and then rinse with water. 5, the pump on the tape to be unloaded, and then rinse with water after drying in the light, do not put the tape on the dark and humid place. Pumps must not be stained with oil tape, not to be coated with adhesive tape some things. 6, to carefully check whether there is a rift on the impeller, the impeller is fixed on the bearing loose, if cracks and loosening phenomenon should be promptly repaired, if the pump impeller above the soil should be cleaned. 7, pump and pipe connections must be done at the seal, because if there is debris entering it will cause damage to the internal pump. 8, the bearing on the pump is also the focus of inspection, exhausted check the bearing for wear, if the pump used for a long time, then the small ball bearings will be broken, so when the pump after the best bearing is coated with a layer Lubricant to better protect the pump bearings. This article Keywords: water pump