Aluminum Color Coated Sheet is Aluminum Sheet with color coated on one side or two sides.It is widely used in construction areas.It is light in the weight and easy to be recycled.Also with the color coating,the surface is good looking and has longer life in corrosion resistance.Aluminum Color Coated Sheet has more advantage as follows:
1. Easy to process. Colored Aluminum Sheets,Painted Aluminum Sheets,Decorative Aluminum Sheet,Coloured Aluminium Sheet Trumony Aluminum Limited , https://www.szaluminumcoil.com
One, can not be heated:
1. The solid state relay has no output. Replace the solid state relay 2. The meter has no output. Replace the meter 3. The heater tube is damaged. Check the resistance of the heater tube. If it is abnormal, replace it. 4. The water shortage causes the heat shield to check whether the water level is normal. There is no error 5, over-temperature protection malfunction, adjust the protection temperature, if still can not be solved, replace the over-temperature protection Second, the heating temperature is not normal:
1, the test chamber temperature controller temperature, set too low, the temperature controller is set to the desired temperature 2, the test chamber safety switch is set too low, the safety switch is set to the required temperature 3, saturated barrel Temperature controller temperature is too low, set the temperature controller to the required temperature 4, saturated bucket safety switch is set too low, the safety switch is set to the desired temperature Third, the instrument no display:
1. Whether the device has power supply, no power supply, please ask a professional electrician to check if the power switch is damaged. If it is damaged, replace the power switch. 3. Is the power circuit breaker damaged? If it is damaged, replace the circuit breaker. Power supply, power supply indicates that the instrument is damaged, need to replace the meter 5, check the device power supply terminals have black traces, if there is a black note that the instrument may burn, it is necessary to replace the meter above is the salt spray tester heating failure And solutions, if you have other doubts about the above issues, or would like to know more about salt spray testing machine information, welcome to inquire, we will serve you at the first time.
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
Salt mist tester heating failure causes and solutions
Salt spray test machine heating failure causes and solutions Salt spray test machine during use will appear some problems, leading to the test can not be carried out smoothly, today Haida technicians mainly for everyone to introduce the following salt spray test machine heating failure causes and solutions: