We mainly supply deutz diesel generator set, Cummins generator set, Perkins generator set. Installation requirements: 1, diesel generating units should be left around no less than 1 meter space, the water tank side of the size of the tank according to the size of the ventilation window. This requirement is the minimum size of the unit room, the user can be increased according to need. 2, diesel generator foundation should be built on the hard ground, rammed, do 200mm thick concrete floor, the ground should be flat. 3, the user in the construction of the engine room, the roof should be buried in the top of the unit buried with the I-beam (≤ 250KW the following may not), for future maintenance. 4, the engine room should be well ventilated, the ground should be smooth, non-slip. 5, the unit exhaust pipe diameter should not be less than the diameter of the diesel engine exhaust, elbow should not be more than 3, the elbow angle should be greater than 90 degrees, the exhaust pipe should be supported or hoisting bracket to ensure that the unit silencer, Not force. 6, the engine room should be equipped with fire extinguishers and other fire tools.