Side-mounted compression garbage truck_price of 5 square side-mounted compression dump garbage truck_function_parameters_photo_and introduction

Dongfeng Duolika chassis: adopt Chaochai or Yuchai engine, National VI emission, wheelbase 3308mm, with ABS, original air conditioner,

Dongfeng five-speed gearbox, 7.50 steel wire tires.

24-hour consultation on car purchase (same number on WeChat)

Performance profile:
★ The hanging bucket type garbage truck adopts chain and hydraulic cylinder linkage device to realize the lifting and turning of the garbage bucket, and the garbage in multiple garbage buckets is automatically collected into the compartment.

And dump it to the destination disposable having sealed, self-loading dump function, hydraulically operated. Suitable for trash cans of national general standards: iron buckets, plastic buckets, and a large supply of trash hanging buckets.
Dedicated configuration
★ Self-loading and unloading garbage trucks are also called hanging bin garbage trucks. The car body can be made of carbon steel, stainless steel, and epoxy resin anti-corrosion treatment inside.

The characteristic of the hanging bucket type garbage truck is that one truck can be equipped with dozens of garbage compartments, which can realize the combined operation of one truck and multiple garbage compartments and circular transportation, which fully improves the transportation capacity of the vehicle, and is especially suitable for short-distance transportation. The sanitation department cleans up and transports urban garbage.
1.
Both the upper cover and the back cover are opened and closed hydraulically. In order to ensure the self-unloading of contaminated media, a scraper device is installed in the trash bin. Using hydraulic drive, the residual ash (slag) rate is less than 3‰ .
2. The
hydraulic system adopts high-quality lifting cylinders, operating valves, compression fittings, high-pressure hoses, and high-pressure steel pipes. The installation is reasonable, and reliable fixing devices are arranged to ensure that there is no leakage for a long time, and it is reliable and easy to maintain. ,Extended service life.
3. The
trash bin is made of high-quality steel plates produced by Wuhan Iron and Steel, and the bottom of the bin can be equipped with stainless steel plates to ensure the smoothness of the medium during self-unloading. At the same time, the bottom of the bin can be equipped with anti-freezing settings according to the seasonal temperature of the region to ensure that the hanging bucket type garbage The normal operation of vehicles.

24-hour consultation on car purchase (same number on WeChat)


5-square side-mounted compression garbage truck : single-row white cab , beige interior , beige fabric seats , seat belts , heating control , Dongfeng classic double Feiyan logo,

Dongfeng 5- speed gearbox , auto brake , thickened high-strength front bumper , front fog lamp , adjustable crystal headlights , wide-angle rearview mirror , front road mirror

3308mm , original power steering. The carriage consists of a sealed garbage compartment, a hydraulic system and an operating system.

One truck can correspond to multiple trash cans, which can be hung up and down by itself, and the next cycle time is ≤50S.

The carriage is self-unloading, with double tops and small three-section oil cylinders. The back of the big carriage is a hydraulic top cover. Sealing strips are installed around it, and one oil cylinder is installed on each side.

It is convenient for the rear door to be sealed and opened. There is a feed port on the top of the main compartment, and a hydraulic cylinder at the front and rear to open. The feed port is equipped with hydraulic rubber strips.

Reinforcing ribs are installed on the front, rear and top of the main compartment to prevent cargo unloading and loading of the compartment. A hoist and ladder are installed on the right side of the vehicle.

24-hour consultation on car purchase (same number on WeChat)


Product categories of Animal Food MachineThis processing line produces pet food such as dog food, cat food, dog chew,  fish feed, etc.

We are specialized manufacturers with 15 years of extruder experience, we have the perfect after-sales service and technical support. Look forward to your cooperation!  


Animal Food Machine

Dog Food Machine,Fish Pellet Machine,Pet Food Machine,Pet Food Extruder

Jinan Chenyang Technology Co., Ltd. , https://www.cyfoodextruder.com