The processing of kyanite mineral processing process kyanite minerals generally uses three methods of flotation, magnetic separation and re-election, and also adopts electric selection method, but it is mainly based on re-election flotation. Magnetic separation is used as a means of removing impurities. The specific beneficiation method, pharmaceutical system, and selection process shall be determined according to the characteristics of the deposit, the composition of the ore, the structural structure, and the nature of the surrounding rock. Fine-grained kyanite ore is mainly used in flotation. Because the proportion of kyanite minerals and gangue minerals and gangue minerals is not large, re-election is generally not considered. The principle process flow is shown in Figure 1 below. Single flotation principle process flow 1 Grading flotation principle process flow 2 Heavy-floating joint principle process 3
Waveguide Sealdozens of varieties, more than
1,000 kinds of specifications, Changchun Taiyuan Fluorine Gold Mica Co., Ltd.
produces Waveguide Seal manufacturers real materials, welcome site visits. Waveguide
Sealin the
end Well there, samples are provided free of charge. Changchun Taiyuan Mica
Film Production Base is looking forward to your visit. Can Waveguide Seal save money?
Waveguide Seal Waveguide Seal,Military Radar Wave Sealing Window,Radar Antenna Feeder System Sealing Window,Waveguide Media Sheet Changchun City Taiyuan FluorphlogopiteCo. Ltd. , https://www.micaslice.com
Coarse-grained kyanite ore, including coarse-grained and fine-grained ore-like ores, and a reasonable beneficiation process is re-election or re-floating. First, the ore is divided into two grades of coarse and fine, and the coarse fraction is treated by a re-selecting shaker and recovered by fine-grained flotation. Ingredients were selected: coarse particles 35-65 mesh, fine particles - 65 mesh. The biggest feature of the process is that it avoids over-grinding of coarse-grained kyanite, improves the recovery rate, and also ensures the particle size of kyanite minerals larger than 65 mesh in the concentrate. The principle process flow is shown in Figure 2 below.
Mixed kyanite ore, including two types of ore with coarse and fine grain inlays, can be combined with a re-floating process (see Figure 3 below). The grading flotation method can also be adopted. The beneficiation process is as follows: the material after deliming is divided into two grades of +60 mesh and -60 mesh, and then separately subjected to flotation, which has the advantages that the recovery rate of the coarse kyanite is high. The principle process is as follows: 