SUITABLE MATERIALS: FABRIC, LEATHER, PLEXIGLASS, ACRYLIC, PLASTIC, RUBBER, TILE, WOOD PRODUCTS, BAMBOO PRODUCTS, WOOL, PAPER MATERIALS, CERAMICS AND OTHER NON-METAL MATERIALS.
Application Industry
CLOTHING, FOOTWEAR, LUGGAGE, COMPUTERIZED EMBROIDERY AND CLIPPING, MODEL, ELECTRONIC APPLIANCES, TOYS, FURNITURE, ADVERTISING DECORATION, PACKAGING PRINTING, PAPER PRODUCTS, HANDICRAFTS, AND OTHER INDUSTRIES.
1. Pre-Sale Service
We provide free consultation services including engineering support, user departments, and supply chain teams. We also conduct sample testing and help choose the right model for your needs.
2. Training & Installation
We deliver the machine to your designated location, assist with installation, testing, and confirmation if needed. After signing the contract, we offer free training for at least two individuals.
- Laser safety knowledge
- Basic principles of laser devices and structure of the laser cutter
- Operating skills of the control system
- Daily maintenance, laser adjustment, and component replacement
3. Equipment Testing & Confirmation
After signing the contract, Hanniu Laser will design and manufacture the equipment based on your specific requirements. You can test the machine against all technological standards at our facility. Following installation and testing, both parties will confirm the feasibility, stability, and reliability of the equipment according to the agreed standards.
4. After-Sale Service
Hanniu Laser offers a one-year warranty, lifelong maintenance, and technical support as needed. During the warranty period, any damage to components (excluding those caused by force majeure or normal wear and tear) will be repaired or replaced free of charge. After the warranty period, customers will be charged for repair costs and material expenses.
Tert-Butyl peroxybenzoate (TBPB) a chemical compound from the group of peresters. It is often used as a radical initiator in polymerization reactions, such as the production of LDPE from ethylene, and for crosslinking, such as for unsaturated polyester resins.
TBPB is a low volatility ,high purity,liquid, aromatic peroxuester.it is effective as medium of a broad spectrum of monomers e.g .styrene.ethylenn,acrylics.it is also used to cure (copolymerzation) unsaturated resins .
TBPB is a clear light yellow liquid, which is little soluble in water but well in many organic solvents such as ethanol or phthalate.
As peroxo compound, TBPB contains about 8.16 wt% of active oxygen and has a self accelerating decomposition temperature (SADT) of about 60 °C. The SADT is the lowest temperature at which self-accelerating decomposition in the transport packaging can occur within a week, and which should not be exceeded while storage or transportation.[2] TBPB should therefore be stored between minimum 10 °C (below solidification) and maximum 50 °C. Dilution with a high-boiling solvent increases the SADT. The half-life of TBPB, in which 50% of the peroxy ester is decomposed, is 10 hours at 104 °C, one hour at 124 °C and one minute at 165 °C. Amines, metal ions, strong acids and bases, as well as strong reducing and oxidizing agents accelerate the decomposition of TBPB even in low concentrations.[ However, TBPB is one of the safest peresters or organic peroxides in handling. The main decomposition products of tert-butyl peroxybenzoate are carbon dioxide, acetone, methane, tert-butanol, benzoic acid and benzene.
98%Tert-Butyl Peroxy Benzoate,98%Tert-Butyl Peroxy Benzoate Compound,98%Tert Butyl Peroxy Benzoate,98%Tert-Butyl Peroxy Jiangxi Zhewei Material Technology Co.,Ltd , https://www.jxzwchem.com
No: UD1390
Machine detail :
Technical Parameters
Specifications
Model
UD1390
Cutting Area
1300*900mm
Cutting Speed
≤64000mm/s
Laser Type
CO2
Cutting Power
120W
Laser Life
3000-5000 hours
Resolution
0.025mm
Minimum Character
Chinese: 2mm / Letter: 1mm
Transmission
Pulley Guide
Positioning Accuracy
±0.01mm
Power Supply
AC 220V ±10%, 50HZ/60HZ
Gross Power
<2000W
Operating Temperature
0-45°C
Operating Humidity
5%-95%
Control System
RDLC-V6.3272
Supported Graphics
BMP, GIF, JPEG, PCX, TGA, TIFF, PLT, CDR, DWG, DXF
Cooling
Water Cooling (CW5200)
Operating System
Win98/Win2000/WinXP/Win7
Net Weight
480KG
Max Cutting Thickness
≤20mm (Acrylic) ≤10mm (Wood)
Dimensions
1900*1530*1100mm
Trade Terms
1. Payment: TT, 50% deposit, balance paid before delivery
5. Shipping Port: Guangzhou Port
2. Price Term: EXW Guangzhou
6. Delivery Time: About one week after deposit received
3. Packaging: Strong wooden case
7. Offer Validity: 15 days
4. Certificates: CE, FDA
Application Materials
:
Â
Package
Company Show
120W Guangzhou CO2 Laser Cutting Machine High Table for Nonmetal Engraving and Cutting
Model NO.: UD1390
Laser Technology: Laser Control Fault Cutting
Automation: Automatic Feeding
Type for Cutting Machine: Laser Cutting Engraving Machine
Suitable Material: Non-Metal
Trademark: Hanniu
Transport Package: Wooden Packing / Iron Stand Packing
Specification: 1900*1530*1100mm
Origin: Guangzhou, Guangdong, China
HS Code: 8456100090
 120W GUANGZHOU CO2 LASER CUTTING MACHINE HIGH TABLE FOR NONMETAL ENGRAVING AND CUTTING Â