Filter Press Feed Pump,Slurry Pump For Water Filter,Filter Press Feed Pump Selection,Pump For Pneumatic Diaphragm Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com
DCL-MZZ actutor can be used for multiple rotary motion and can realize the moment and close the valve, particularly suitable for small plug valve, the spiral valve hard seal valve with.
DCL-MZZ multi-turn Electric actuator (20Nm) performance parameters:
 Power Supply:
 DC24V
 Motor power:
 20W
 Turning circle number:
 0-3.5 circles
 Rotary speed:
 5r/min
 The output torque:
 20Nm
 Weight:
 1.2kg
 Protection grade:
 IP67
I. Specification
DCL-MZZ series Electric actuator is an ON/OFF , Multi-turn smart type electric actuator which powered by DC brushless motor and the control circuit adopted single chip. It provides several fault diagnosis and protection functions as well as optional control signals access functions. DCL-MZZ offers two operating models which are inching and continuous. It can be directly connect with all kinds of control system such as instrument, PC,PLC, DCS etc.
II. Main Function
1.Inching or continuous operating mode optional.
2. Torque controlling valve open/close.
3. Full-open position can be set.
4. Protection for conditions like over current or temperature exceeds , over-torque, voltage shortage.
5.Interlocking function for open and close.
Â
III. Technique Date
1.     Electric level and impulse control signal.
Low level effective; low level ≤0.5V;high level ≥5V ; sink current: 10Ma.
2.     Full open or Full closed position output signal
Electric level output :DC24V, Low level effective
Drive attachment with relay: DC 24V Reply
3. Voltage:DC24V±15%.
4. Current:0.6A.
5. Torque:20Nm
6. Ambient Temperature:-25~75ºC.
7. Humidity:≤95%RH.
DCL-MZZ actutor can be used for multiple rotary motion and can realize the moment and close the valve, particularly suitable for small plug valve, the spiral valve hard seal valve with.
DCL-MZZ multi-turn Electric actuator (20Nm) performance parameters:
 Power Supply:
 DC24V
 Motor power:
 20W
 Turning circle number:
 0-3.5 circles
 Rotary speed:
 5r/min
 The output torque:
 20Nm
 Weight:
 1.2kg
 Protection grade:
 IP67
I. Specification
DCL-MZZ series Electric actuator is an ON/OFF , Multi-turn smart type electric actuator which powered by DC brushless motor and the control circuit adopted single chip. It provides several fault diagnosis and protection functions as well as optional control signals access functions. DCL-MZZ offers two operating models which are inching and continuous. It can be directly connect with all kinds of control system such as instrument, PC,PLC, DCS etc.
II. Main Function
1.Inching or continuous operating mode optional.
2. Torque controlling valve open/close.
3. Full-open position can be set.
4. Protection for conditions like over current or temperature exceeds , over-torque, voltage shortage.
5.Interlocking function for open and close.
Â
III. Technique Date
1.     Electric level and impulse control signal.
Low level effective; low level ≤0.5V;high level ≥5V ; sink current: 10Ma.
2.     Full open or Full closed position output signal
Electric level output :DC24V, Low level effective
Drive attachment with relay: DC 24V Reply
3. Voltage:DC24V±15%.
4. Current:0.6A.
5. Torque:20Nm
6. Ambient Temperature:-25~75ºC.
7. Humidity:≤95%RH.
Dcl-Mzz 24VDC Brushless Multi-Turn Electric Actuator (DCL02)
Model NO.: DCL-MZZ (DCL-M02)
Origin: Wuhan, China
HS Code: 8537109090
Model NO.: DCL-MZZ (DCL-M02)
Origin: Wuhan, China
HS Code: 8537109090