CNC Folding Machine

Model NO.: CNC folding machine

Production Scope: Product Line

Thickness of Steel Sheet: 0.5-1.75mm

Length of Formed Sheet: >=290mm

Height of Corrugation: 50-400mm

Corrugation Pitch: >=40mm

Corrugation Pitch Accuracy: Â±0.25mm

Corrugation Inner Gap: 6mm

Max Pressure: 25MPa

Max Flux: 200L/Min

Hydraulic Pressure: 16MPa

Coil Inner Diameter: Min 470mm, Max 520mm

Trademark: EN-SOURCE

Transport Package: Steel Wire.

Specification: 300-1300mm

Origin: China, Zhejiang

HS Code: 85041900

Model NO.: CNC folding machine

Production Scope: Product Line

Thickness of Steel Sheet: 0.5-1.75mm

Length of Formed Sheet: >=290mm

Height of Corrugation: 50-400mm

Corrugation Pitch: >=40mm

Corrugation Pitch Accuracy: Â±0.25mm

Corrugation Inner Gap: 6mm

Max Pressure: 25MPa

Max Flux: 200L/Min

Hydraulic Pressure: 16MPa

Coil Inner Diameter: Min 470mm, Max 520mm

Trademark: EN-SOURCE

Transport Package: Steel Wire.

Specification: 300-1300mm

Origin: China, Zhejiang

HS Code: 85041900

CNC folding machine
Â The line is a kind of specialized equipment used for producing color-steel-sided sandwich panels with the middle layer of anti-combustion polyurethane, polyisocyanurate or phenolic foam. The thickness of the produced sandwich panel ranges from 30 to 150 mm, the width between 700 and 1000 mm and the length on request. The production line is mainly applied to make wall and roof panels of steel structure buildings, which can also make various other insulation panels if replacing facing sheet. Its operation principle is as follows: Rigid polyfoam raw materials, according to a certain blending ratio, are delivered into mixing head to agitate through metering pump unit on the injection machine and then uniformly injected onto the bottom facing sheet of sandwich panel. After the injection, the bottom facing sheet shall move toward the double-belt conveyors together with panel's top facing sheet. Between the two conveyors, injected raw material is foamed and hardened into shape. At the end of the line, the formed sandwich panel is cut into preset length by an automatic tracking cutter.

Â Â Â

Â
Optional equipment
Â

Â

1.Flipper: To flip finished panels over onto a powered roller conveyor ready for the next packing process.
2.Cooling system: To be put at the end of sandwich panel production line for the purpose of cooling sandwich panels. It can flip and load 4 pcs of 2.4m panels at one time. Two such systems can load about 120 pcs of sandwich panels. Distance between the two shafts of the system is 6m and chain pitch is 200mm.Â
3. Lifting and parallel moving installation with vacuum suckers: To move panels from ready-stacking position onto a a powered roller conveyor for the next process, whole operation automatically controlled by PLC.
4. Packing machine of winding type: For packing sandwich panels.Â

Main technical parameters

Specification of the panelÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 700~1000mm (width)
Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30~150mm (thickness)
Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Length to be custom-made
Production speedÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3~8m/min
Length of belt laminatorÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 24m
Max temperature of hot-air circulationÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 70ÂºC
Dimensions of the lineÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â about 97000Ã—7,000Ã—3,800mm(LÃ—WÃ—H)
Total powerÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â about 213kw
Power of hot-air furnaceÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200000 kcal

1.Â Hydraulic decoiler Â Â Â Â Â Â Â Â Â Â 2.Â Upper and lower forming machineÂ Â
Â 3.Â Pre-heating table Â Â Â Â Â Â Â Â Â Â 4.Â Heating ovenÂ Â Â
5.Â Reaction injection machineÂ Â Â 6.Side chemical sealing installationÂ Â
7.Â Double-belt laminator Â Â Â Â Â Â 8.Â Hot-air circulatorÂ Â Â
9.Â Cross-cutter Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10.Â Hydraulic clipper & film coverer Â Â

Â

Â Â Â Â Â
Â
Â
Â
Â
CNC folding machine
Â The line is a kind of specialized equipment used for producing color-steel-sided sandwich panels with the middle layer of anti-combustion polyurethane, polyisocyanurate or phenolic foam. The thickness of the produced sandwich panel ranges from 30 to 150 mm, the width between 700 and 1000 mm and the length on request. The production line is mainly applied to make wall and roof panels of steel structure buildings, which can also make various other insulation panels if replacing facing sheet. Its operation principle is as follows: Rigid polyfoam raw materials, according to a certain blending ratio, are delivered into mixing head to agitate through metering pump unit on the injection machine and then uniformly injected onto the bottom facing sheet of sandwich panel. After the injection, the bottom facing sheet shall move toward the double-belt conveyors together with panel's top facing sheet. Between the two conveyors, injected raw material is foamed and hardened into shape. At the end of the line, the formed sandwich panel is cut into preset length by an automatic tracking cutter.

Â Â Â

Â
Optional equipment
Â

Â

1.Flipper: To flip finished panels over onto a powered roller conveyor ready for the next packing process.
2.Cooling system: To be put at the end of sandwich panel production line for the purpose of cooling sandwich panels. It can flip and load 4 pcs of 2.4m panels at one time. Two such systems can load about 120 pcs of sandwich panels. Distance between the two shafts of the system is 6m and chain pitch is 200mm.Â
3. Lifting and parallel moving installation with vacuum suckers: To move panels from ready-stacking position onto a a powered roller conveyor for the next process, whole operation automatically controlled by PLC.
4. Packing machine of winding type: For packing sandwich panels.Â

Main technical parameters

Specification of the panelÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 700~1000mm (width)
Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30~150mm (thickness)
Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Length to be custom-made
Production speedÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3~8m/min
Length of belt laminatorÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 24m
Max temperature of hot-air circulationÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 70ÂºC
Dimensions of the lineÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â about 97000Ã—7,000Ã—3,800mm(LÃ—WÃ—H)
Total powerÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â about 213kw
Power of hot-air furnaceÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 200000 kcal

1.Â Hydraulic decoiler Â Â Â Â Â Â Â Â Â Â 2.Â Upper and lower forming machineÂ Â
Â 3.Â Pre-heating table Â Â Â Â Â Â Â Â Â Â 4.Â Heating ovenÂ Â Â
5.Â Reaction injection machineÂ Â Â 6.Side chemical sealing installationÂ Â
7.Â Double-belt laminator Â Â Â Â Â Â 8.Â Hot-air circulatorÂ Â Â
9.Â Cross-cutter Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10.Â Hydraulic clipper & film coverer Â Â

Â

Â Â Â Â Â
Â
Â
Â
Â
Water tanks are used to provide storage of water for use in many applications, drinking water, irrigation agriculture, fire suppression , agricultural farming, both for plants and livestock, chemical manufacturing, food preparation as well as many other uses.

The SMC combined type Water Tank was designed with the National Building materials Bureau Glass fiber reinforced plastic Research Design institute, is new water tank which at present internationally generally use. It has no leakage, the weight is light, the water quality is good, the contour is artistic, and the service life is long and merits and so on easy installation.

The water tank seal uses the sealing tape which develops specially. This sealing tape non-toxic, water resistant, the elasticity is big, the permanent deformation is small, and the lifetime may above 30 years.

SMC Water Tank
SMC Water Tank
Shandong Hiking International Commerce Group Co.,Ltd , https://www.constructionfrp.com