Cut To Length Roll Forming Machine is using with roll forming machines. Cut to length Roll Forming Machine can cut the raw material coil to pieces. So we can resell the pieces to clients. Steel coil is not only using for roof or wall tiles. It is also using in other field. So they need cut to length roll forming machine for cutting the coils to pieces. Maybe you need one piece for table surface. As you know, barrel corrugated roll forming machine need work with cut to length roll forming machine. We can design different width and thickness cut to length roll forming machine for clients. We produced max width 1500mm and max thickness upto 3mm cut to length roll forming machine
The speed of cut to length roll forming machine is from 8-24m/min. We can reach 24m/min by using bigger motor and sprocket for cut to length roll forming machine. But if you use higher speed cut to length roll forming machine, we sugegst you to choose electric decoiler or hydraulic decoiler. Because the electric and hydraulic decoielr can run same speed with the cut to length roll forming machine. So the cut to length roll forming machine will not break the raw material.
Cut To Length Roll Forming Machine Cut To Length Roll Forming Machine,Cut To Length Machine,Cut To Pieces Roll Forming Machine,Steel Panel Shearing Machine HEBEI YUFA TILE PRESS EQUIPMENT CO.,LTD. , http://www.china-rollformingmachinery.com
The Cross-Strait Standard Forum announced the conclusions of 29 work projects such as LED
The Cross-Strait Standards Forum released yesterday (22) on 29 exchanges and cooperation on 5G demand and technology, continued promotion of cross-strait solar photovoltaic common standard application and promotion, and accelerated promotion of LED lighting industry cooperation and other 29 consensus conclusions. The 10th Cross-Strait Information Industry and Technology Standards Forum, jointly sponsored by the Huaju Industry Common Standard and the China Electronics Industry Standardization Technology Association and the China Communications Standards Association, held a summary discussion meeting and held a results conference. Today's summary meeting was co-chaired by Wen Ke, Director of the Science and Technology Department of the Ministry of Industry and Information Technology, and Xu Shengxiong, Vice Chairman of the Huaju Foundation. The results of the consensus conclusions of this year's 9-component group forum were released, and the important cooperation direction of the cross-strait capital communication industry will be established next year. With the goal. Among them, in the mobile communication / mobile Internet sub-forum, a total of six consensuses were issued, including the research and development of common standards for TD-LTE small base stations, improving TD-LTE hotspot/indoor coverage, and carrying out 5G demand and technology exchange and cooperation. Promote the research and development of 5G technology, continue to strengthen the exchange and cooperation of TD-LTE test standards, and actively promote the exchange of intelligent terminal and mobile Internet application technology standards. The service application sub-forum part, the two sides reached a consensus, will conduct in-depth research and discussion on the Internet of Things, mobile payment, smart city, smart medical and smart health, and recently held a meeting to determine the next work plan. The semiconductor lighting sub-forum includes four consensuses to accelerate the cooperation in the LED lighting industry. In the solar photovoltaic sub-forum part, the two sides reached four consensuses to continue to promote the application and promotion of cross-strait solar photovoltaic common standards. Others have established cross-strait communication, information sharing and cooperation mechanisms in cloud computing technology, industry and standards, and held meetings again before the end of the year; research on the feasibility of common standards for safety requirements for lithium-ion batteries for electric two-wheelers (bicycles) And other group consensus.