We've involved in there field for many years, so we have rich experience. About Industrial Components, there are Auto Parts , Agriculture Parts , Medical Equipment Parts, Pump&valve parts, Hydraulic Components, Electronics Parts, Fastener , Pipe Fittings . Here comes the specific information about these parts. Pls see to below introduction:
First see below related our photos of these parts:
Detail information about these parts:
Many kinds of auto parts, car brand is now more and more, more and more types of vehicles. Commercial vehicles and passenger cars can be divided into two types, which refers to a passenger vehicle less than nine seats to sit (including the driver bits), with the primary purpose passenger vehicles. Specifically, the passenger car that is divided into the basic passenger car, MPV car, SUV and other vehicles such as pickups and other vehicles.
Agricultural products include, amongst others, tractors, combine harvesters, cotton harvesters, balers, planters/seeders, silage machines, and sprayers, as well as different parts. Combine Parts, Engine & Drivetrain, Filters and Filter Paks, Hay and Forage Parts, Planting and Seeding Parts, Reman parts, Sprayer parts, truck parts, tractors parts, etc
Medical equipment and continuously improve the basic conditions for medical science and technology level is an important indicator of the degree of modernization, medical equipment has become an important field of modern medicine. Development depends largely on the development of medical equipment, and even in the development of the medical industry, which break through the bottleneck also played a decisive role.
Hydraulics is a topic in applied science and engineering dealing with the mechanical properties of liquids or fluids. At a very basic level, hydraulics is the liquid version of pneumatics. Fluid mechanics provides the theoretical foundation for hydraulics, which focuses on the engineering uses of fluid properties. In fluid power, hydraulics are used for the generation, control, and transmission of power by the use of pressurized liquids. Hydraulic topics range through some part of science and most of engineering modules, and cover concepts such as pipe flow, dam design, fluidics and fluid control circuitry, pumps, turbines, hydropower, computational fluid dynamics, flow measurement, river channel behaviour and erosion.
As an international partner with international top contractors, besides comprehensive service of dredging, land reclamation, offshore projects, marine engineering, municipal engineering and environmental remediation projects, based on above experience with strong financial condition, UniSite group also developed the machining equipment and production capability and is able to provide the Hydraulics components.
Aerospace is not the same as airspace, which is the physical air space directly above a location on the ground. The beginning of space and the ending of the air is considered as 100 km above the ground according to the physical explanation that the air pressure is too low and recognized by authorities
Fasteners can also be used to close a container such as a bag, a box, or an envelope; or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc. There are also special-purpose closing devices, e.g. a bread clip. Fasteners used in these manners are often temporary, in that they may be fastened and unfastened repeatedly.
A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating {or measuring) fluid flow. "Plumbing" is generally used to describe the conveyance of water, gas, or liquid waste in domestic or commercial environments; "piping" is often used to describe the high-performance (high-pressure, high-flow, high-temperature or hazardous-material) conveyance of fluids in specialized applications. "Tubing" is sometimes used for lighter-weight piping, especially those flexible enough to be supplied in coiled form.
The Photos of detail products:
Industrial Components Industrial Components ,Auto Parts,Agriculture Parts,Medical Equipment Parts UniSite Group , http://www.unisitemachining.com
It is understood that the joint venture's own brand is an important path for the current development of the joint venture. At the end of November, FAW Toyota will also launch its own joint venture brand.
Toyota, which is one of the three major Japanese brands, has not yet launched its own joint-venture brand. However, at the recent Guangzhou Auto Show, Toyota (China) Vice Chairman Daixi Hiroshi revealed to the media: Toyota's joint venture company in China, FAW Toyota, will Launch its own joint venture brand. At the same time, General Manager Hiroyuki Hirano of FAW Toyota Motor Sales Co., Ltd. also said in an interview with the media that the joint venture brand to be promoted in the future will not have only one model.
First, FAW Toyota will promote its own joint venture next year, there will be a variety of models now launched the joint-venture brand manufacturers only launched a model, and a single brand alone can not be supported by a single model, and will launch a joint venture own brand FAW Toyota clearly knows this. General Manager Hiroyuki Hirano of FAW Toyota Motor Sales Co., Ltd. said in an interview with the media: The joint venture is an independent brand and will have its own brand name, slogan and so on. Of course, since it is a created brand, a brand cannot have only one car. In order to publicize the popularity, the model will be combined with the brand.
Second, do not simply change or cut from the high-end In the current known Japanese self-owned brands of the highest level for the Kai Chen D50 and Siming, both models are positioned as a compact A-class car, and the first joint venture independent brand The concept is that its first model level is positioned as A0 level, and the unified approach of the models is to continue to sell the discontinued joint venture models after changing the joint venture's own mark. Tian Tian, ​​deputy general manager of FAW Toyota recently told the media that: FAW Toyota will not adopt a simple model of changing an outdated joint venture car into a self-owned car, and may start high-end entry. This shows that FAW Toyota attaches importance to the joint venture model.
Both FAW Toyota and GAC Toyota will launch their own joint venture brands next year, and both said that they will not adopt a simple model of changing outdated joint venture vehicles into autonomous vehicles. This will undoubtedly enable consumers to regain confidence in Toyota. 
