Technical Parameters                          Wheel Wash Machine Model YG-500 Available Vehicles Engineering vehicles (10–100 tons), garbage trucks, or other types of vehicles Starting Mode Automatic mechanical sensing start or manual start Water Pressure 4–5 kg/cm² Voltage AC 380V Power 5.5 kW Washing Time 1–60 seconds per vehicle (optional) Water Consumption < 5 L/vehicle (recycled) Size 2200 × 3600 × 1100 mm Weight 500 kg Product Features and Details                     1. Easy to transport, install, and operate. 2. Strong anti-rust performance and long-lasting stability. 3. Specifically designed for vehicles used in construction sites. 4. Effectively eliminates dust pollution caused by dirty vehicles. 5. Water recycling system helps save water and reduce environmental impact. Hot Melt Adhesive For Book Spine Book glue is mainly divided into back glue and side glue, the back glue is mainly milky white, and the side glue is mainly white transparent or light yellow transparent. Hot Melt Adhesive For Book Spine,Books Binding Hot Melt Glue,Books Binding Spine Glue,Books Binding Spine Adhesive Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com
Product Description
The High Pressure Car Wash Machine, also known as the Truck Washing Machine, is specifically designed to clean vehicle chassis and tires. Equipped with multi-directional high-pressure water jets and a computerized numerical control system, this machine can automatically wash vehicles, ensuring efficiency and cleanliness. It meets the standards set by municipal administrations, road authorities, construction commissions, environmental agencies, and transportation departments. This equipment is widely used in construction sites, quarries, cement plants, coal mines, power stations, landfills, and upscale communities for vehicle washing.
Washing Process                               
Company Strength                              
Company book glue properties.
In order to ensure the binding speed of books, different types of hot melt adhesives should be selected according to different machine speeds. Hot melt adhesives are divided into three types according to the binding speed: low speed binding hot melt adhesives (about 3600 copies/hour), medium speed binding hot melt adhesives (about 8000 copies/hour) and high speed binding hot melt adhesives (about 10000 copies/hour). The opening time and curing time of hot melt adhesive are closely related to the speed of binding. The opening time refers to the time between the hot melt adhesive and the other adhesive after the hot melt adhesive is applied to one adhesive. The opening time indicates that the two bonded objects must be bonded within the specified time, so as to ensure the bond strength. The opening time of the low-speed machine is 15 to 20 seconds, the medium-speed machine is 5 to 10 seconds, and the high-speed machine is 2 to 7 seconds. The curing time of hot melt adhesive refers to that after the cover and book block are bonded within the specified time, they can be turned and pressurized after a certain period of cooling, which is called the curing time. If the hot melt glue has not been cured, shaped and turned or cut, the back of the book will be deformed, and the hot melt glue will stick to the blade during cutting, affecting the quality of the product. When used, it should be reasonably selected according to the length of the conveyor belt, transmission speed, seasonal changes, etc. The curing time of hot melt adhesive is generally 3 to 5 minutes. 2) According to paper classification can be divided into coated paper and general paper with hot melt adhesive. The use of different types of paper, to choose the corresponding hot melt adhesive, because the paper surface finish, permeability, thermal conductivity is different. 3) According to the use of binding is classified into side glue and back glue. The hot melt adhesive used as side adhesive has good fluidity, low viscosity, long opening time and curing time, and high bonding strength. Book side glue requirements to achieve thin and uniform, bond firmly, in order to ensure the quality of the book and cutting requirements. You can't use two kinds of glue wrong. 4) According to the color of the glue classification In addition, if it is the same grade of product, yellow glue is better than white glue (but the manual generally requires the glue to be white). 302 series glue can meet the viscosity, hardness and color.
High Pressure Car Wash Machine Truck Washing Machine
**High Pressure Car Wash Machine / Truck Washing Machine**